1. Sanded and repainted the lower avionics shelf after a painting fiasco caused by me. (Not pictured).
2. Installed T-connectors to the GSU 26 ADAHRS, One side will be from the pitot/static sources, and the other will go to the Garmin G5.
3. Crawled into the aft fuselage (my least-favorite place), removed the old RG-400 transponder coax, and replaced it with the new, much better and shorter coax. I left one end without a BNC connector until I see exactly how long the cable needs to be.
4. Re-designed a bit of the Main electrical bus to minimize wire runs. Essentially, I am "ganging" together the rows of C/Bs in a more efficient way.